Verti-till turbo cultivator Green Wave of 9.1 m cultivador de rastrojo nuevo

PDF
Verti-till turbo cultivator Green Wave of 9.1 m cultivador de rastrojo nuevo
Verti-till turbo cultivator Green Wave of 9.1 m cultivador de rastrojo nuevo
Verti-till turbo cultivator Green Wave of 9.1 m cultivador de rastrojo nuevo imagen 2
Verti-till turbo cultivator Green Wave of 9.1 m cultivador de rastrojo nuevo imagen 3
Verti-till turbo cultivator Green Wave of 9.1 m cultivador de rastrojo nuevo imagen 4
Verti-till turbo cultivator Green Wave of 9.1 m cultivador de rastrojo nuevo imagen 5
Verti-till turbo cultivator Green Wave of 9.1 m cultivador de rastrojo nuevo imagen 6
Verti-till turbo cultivator Green Wave of 9.1 m cultivador de rastrojo nuevo imagen 7
Verti-till turbo cultivator Green Wave of 9.1 m cultivador de rastrojo nuevo imagen 8
Verti-till turbo cultivator Green Wave of 9.1 m cultivador de rastrojo nuevo imagen 9
Verti-till turbo cultivator Green Wave of 9.1 m cultivador de rastrojo nuevo imagen 10
Verti-till turbo cultivator Green Wave of 9.1 m cultivador de rastrojo nuevo imagen 11
Verti-till turbo cultivator Green Wave of 9.1 m cultivador de rastrojo nuevo imagen 12
¿Le interesa el anuncio?
1/12
PDF
Precio:
a consultar
Consulte el precio
Contacte con el vendedor
Ubicación: Ucrania m.Dnipro9354 km de usted
Id. de stock del vendedor: 10061
Fecha de publicación: hoy
Descripción
Ancho de alcance: 18,2 m
Estado
Estado: nuevo

Información adicional — Verti-till turbo cultivator Green Wave of 9.1 m cultivador de rastrojo nuevo

In the presence of units with different working widths: 2.6 m, 3.9 m, 5.2 m, 6.5 m, 7.8 m, 9.1 m, 10.4 m, 11.7 m, 18.2 m.
Designed for various types of autumn-spring field work:


field work with a lot of crop residues;
crushing of a solid surface soil layer;
application and mixing of herbicides, compost and fertilizers;
preparation of the field, seed bed with traditional, preserving and zero technologies.


Advantages and design features of the Green Wave vertical tillage turbo cultivator with a working width of 9.1  m:


it is used in various soil and climatic zones when treating soils of different mechanical composition with moisture up to 28% and hardness up to 3.5 MPa (35 kg / cm²), not clogged with stones, flagstone and other obstacles;
it is aggregated with wheel and caterpillar tractors with engine power corresponding to the width of a particular model;
It is a trailed machine, it is controlled and serviced by one person (tractor driver);
the working bodies of the turbo cultivator are 13-wave turbo discs mounted on spring blocks;
vertical vibration of turbo discs affects the earth like a jackhammer, crushing the soil below the working depth level, breaking soil compaction and creating conditions for the accumulation and preservation of soil moisture;
when working on very heavy soils, it is possible to install discs at an angle in the range from 0 ° to 6 °. This makes it possible to better loosen and level the soil in difficult conditions;
spring blocks mounted on the frame in a checkerboard pattern, for better passage of crop residues;
equipped with a 3-row flex harrow and a spiral-shaped ribbed roller for even distribution of crop residues and crumbling of soil lumps;
the transfer of the turbo cultivator from the working position to the transport one, and vice versa, is carried out using hydraulic drives. In the parking position, the turbo cultivator is installed on the parking jack;
to adjust the degree of impact of the train harrow on the soil and plant debris, it is possible to set two tooth positions - 50 ° and 38 °, this is achieved by reversing the sections of the train;
range of working depth 0-18 cm;
the distance between the turbo discs is 16 cm;
5 bolt reinforced hub with two sealed SKF bearings;
the force of the springs at which the operation of the safety mechanism of the safety unit begins is 500 kg
the vertical stroke of the spring unit with turbo discs for circumventing obstacles is up to 250 mm.


Basic equipment:


turbo cultivator;
wavy turbo discs 570 mm x 5 mm 13 waves (32 mm wave depth);
three-row flex harrow;
spiral-shaped ribbed roller.


Additional equipment:


tubular roller with a flex harrow;
special loaders of the unit frame, for using a turbo cultivator on heavy soils, for better penetration of discs into the soil;
wavy turbo discs 550 mm x 5 mm 8 waves (65 mm wave depth);
mechanical granular fertilizer application system (for models with a working width of 2.6 m, 3.9 m, 5.2 m).


Specifications:

Type ... trailed
Tractor hitch ... pendulum
Average speed, km / h ... 15
Working width, m ... 9.1
Working length, m ... 8.9
Length during transportation, m ... 8.9
Height during transportation, m ... 4
Width during transportation, m ... 5.5
Total weight, t ... 10.2
Number of spring blocks, pcs … 28
Number of turbo disks, pcs ... 56
The distance between the turbo disks, m ... 0.162
Depth of processing, mm ... 0-180
Depth adjustment ... set of clips 50/30/19/10 / 7mm on the rods of hydraulic cylinders
Tire Sizes:
The support wheels of the wing frames ... 10.0 / 75-15.3 (14PR)
The support wheels of the frames of the central frame ... 19.0 / 45-17 (18PR)
Tire pressure, bar ... 4-5
Hydraulic system pressure, bar ... 180
Minimum tractor power, hp ... 400
When deep processing is recommended, hp ... 450
The number of staff, people ... 1
field work with a lot of crop residues;
crushing of a solid surface soil layer;
application and mixing of herbicides, compost and fertilizers;
preparation of the field, seed bed with traditional, preserving and zero technologies.
it is used in various soil and climatic zones when treating soils of different mechanical composition with moisture up to 28% and hardness up to 3.5 MPa (35 kg / cm²), not clogged with stones, flagstone and other obstacles;
it is aggregated with wheel and caterpillar tractors with engine power corresponding to the width of a particular model;
It is a trailed machine, it is controlled and serviced by one person (tractor driver);
the working bodies of the turbo cultivator are 13-wave turbo discs mounted on spring blocks;
vertical vibration of turbo discs affects the earth like a jackhammer, crushing the soil below the working depth level, breaking soil compaction and creating conditions for the accumulation and preservation of soil moisture;
when working on very heavy soils, it is possible to install discs at an angle in the range from 0 ° to 6 °. This makes it possible to better loosen and level the soil in difficult conditions;
spring blocks mounted on the frame in a checkerboard pattern, for better passage of crop residues;
equipped with a 3-row flex harrow and a spiral-shaped ribbed roller for even distribution of crop residues and crumbling of soil lumps;
the transfer of the turbo cultivator from the working position to the transport one, and vice versa, is carried out using hydraulic drives. In the parking position, the turbo cultivator is installed on the parking jack;
to adjust the degree of impact of the train harrow on the soil and plant debris, it is possible to set two tooth positions - 50 ° and 38 °, this is achieved by reversing the sections of the train;
range of working depth 0-18 cm;
the distance between the turbo discs is 16 cm;
5 bolt reinforced hub with two sealed SKF bearings;
the force of the springs at which the operation of the safety mechanism of the safety unit begins is 500 kg
the vertical stroke of the spring unit with turbo discs for circumventing obstacles is up to 250 mm.
turbo cultivator;
wavy turbo discs 570 mm x 5 mm 13 waves (32 mm wave depth);
three-row flex harrow;
spiral-shaped ribbed roller.
tubular roller with a flex harrow;
special loaders of the unit frame, for using a turbo cultivator on heavy soils, for better penetration of discs into the soil;
wavy turbo discs 550 mm x 5 mm 8 waves (65 mm wave depth);
mechanical granular fertilizer application system (for models with a working width of 2.6 m, 3.9 m, 5.2 m).
Mostrar todo el comentario
Importante
Esta oferta es de carácter informativo. Para obtener más detalles, póngase en contacto con el vendedor.
Consejos de compra
Consejos de seguridad
Verificación del vendedor

Si decide comprar maquinaria a un precio inferior, póngase en contacto con el verdadero vendedor. Recopile toda la información que le sea posible sobre el propietario de la maquinaria. Una forma de engaño es presentarse como empresa. En caso de sospecha, infórmenos mediante el formulario de comentarios y sugerencias para que lo comprobemos.

Comprobación de precios

Antes de confirmar una compra, revise detenidamente varias ofertas de venta para ver cuál es el precio medio del equipo elegido. Si el precio de la oferta que le interesa es mucho menor que el de ofertas similares, piénselo dos veces. Una diferencia de precio significativa puede conllevar a defectos ocultos o a un intento de fraude por parte del vendedor.

No compre productos cuyo precio diste mucho del precio medio de equipos similares.

No acepte compromisos dudosos o mercancías con prepago. Si no lo tiene claro, no dude en solicitar aclaraciones, pida fotos adicionales y documentos del equipo, compruebe la autenticidad de los mismos y pregunte todo lo necesario.

Prepago dudoso

Esta es la forma más habitual de fraude. Ciertos vendedores pueden requerir una cantidad del pago por adelantado en concepto de «reserva» de su compra. Así, los estafadores perciben grandes cantidades de dinero y después desaparecen sin dejar huella.

Hay varios tipos de fraude, que detallamos:
  • Transferencia de prepago a la tarjeta
  • No realice un pago por adelantado sin documentación que confirme el proceso de transferencia de dinero, si durante la comunicación con el vendedor ha surgido alguna duda.
  • Transferencia a una cuenta «fiduciaria»
  • Dicha solicitud debe alarmarle, ya que en la mayoría de los casos se trata de fraudes.
  • Transferencia a una cuenta de una empresa con un nombre similar
  • Tenga cuidado, ya que los estafadores pueden ocultarse tras la identidad de empresas reconocidas, realizando modificaciones mínimas en su nombre. No transfiera dinero si tiene dudas sobre el nombre de la empresa.
  • Sustitución de sus propios datos en la factura de una empresa real
  • Antes de realizar una transferencia, asegúrese de que los datos especificados sean correctos y que aludan a la empresa en cuestión.
¿Detectó algún fraude?
Infórmenos de lo sucedido
Consejos de seguridad
PDF
¿Vende vehículos o maquinaria?
¡Hagalo con nosotros!
Anuncios similares
Disk-share harrow 4.2 m cultivador de rastrojo nuevo Disk-share harrow 4.2 m cultivador de rastrojo nuevo
2
Precio a consultar
Ancho de alcance 4,2 m Profundidad de procesamiento 400 mm Potencia del tractor requerida 280 Hp Velocidad de funcionamiento 15 km/h
Ucrania, m.Dnipro
Contacte con el vendedor
Spring teeth and cables 3M, 2секции under tilling machines cultivador de rastrojo nuevo Spring teeth and cables 3M, 2секции under tilling machines cultivador de rastrojo nuevo Spring teeth and cables 3M, 2секции under tilling machines cultivador de rastrojo nuevo
3
200,70 € 9.033 UAH ≈ 218,50 US$
Ancho de alcance 3 m
Ucrania, m.Dnipro
Contacte con el vendedor
Precio a consultar
Ancho de alcance 6,5 m Profundidad de procesamiento 180 mm Potencia del tractor requerida 280 Hp
Ucrania, m.Dnipro
Contacte con el vendedor
35.000 US$ ≈ 32.150 € ≈ 143.800.000 COP
2006
Ucrania, Farbovane
Contacte con el vendedor
11.650 € ≈ 12.680 US$ ≈ 52.100.000 COP
2019
Ancho de alcance 3 m Profundidad de procesamiento 250 mm Potencia del tractor requerida 130 Hp
Ucrania, Shumskoy r-n, s. V.Dederkaly
Contacte con el vendedor
Lemken KOMPAKTOR cultivador de rastrojo Lemken KOMPAKTOR cultivador de rastrojo
2
12.000 € ≈ 13.060 US$ ≈ 53.670.000 COP
2006
Ancho de alcance 6 m
Ucrania, Kyiv
Contacte con el vendedor
5.600 US$ ≈ 5.144 € ≈ 23.010.000 COP
2020
Ancho de alcance 3 m Profundidad de procesamiento 120 mm Potencia del tractor requerida 90 Hp
Ucrania
Contacte con el vendedor
Precio a consultar
2022
Ucrania
Contacte con el vendedor
Precio a consultar
2024
Ancho de alcance 5 m Profundidad de procesamiento 250 mm Potencia del tractor requerida 170 Hp
Ucrania, Shumskoy r-n, s. V.Dederkaly
Contacte con el vendedor
Precio a consultar
2012
Ancho de alcance 13,5 m
Ucrania, Zolochiv
Contacte con el vendedor
15.300 € ≈ 16.660 US$ ≈ 68.420.000 COP
2024
Ancho de alcance 3 m Profundidad de procesamiento 250 mm Potencia del tractor requerida 140 Hp
Ucrania, Lutsk
Contacte con el vendedor
12.000 US$ ≈ 11.020 € ≈ 49.300.000 COP
2004
Ancho de alcance 6,5 m
Ucrania
Contacte con el vendedor
9.200 € ≈ 10.020 US$ ≈ 41.140.000 COP
2024
Ancho de alcance 3 m Profundidad de procesamiento 300 mm Potencia del tractor requerida 150 Hp
Ucrania, Lutsk
Contacte con el vendedor
1 € ≈ 1,09 US$ ≈ 4.472 COP
Ancho de alcance 6 m Profundidad de procesamiento 300 mm Potencia del tractor requerida 240 Hp
Ucrania, Mironovka
Contacte con el vendedor
Precio a consultar
2024
Profundidad de procesamiento 250 mm
Ucrania, Lutsk
Contacte con el vendedor
16.500 US$ ≈ 15.160 € ≈ 67.790.000 COP
Ancho de alcance 4,8 m
Ucrania
Contacte con el vendedor
19.800 € ≈ 21.550 US$ ≈ 88.550.000 COP
2022
Ancho de alcance 3 m Potencia del tractor requerida 200 Hp
Ucrania, Lutsk
Contacte con el vendedor
19.000 US$ ≈ 17.450 € ≈ 78.060.000 COP
2008
Ancho de alcance 5 m Profundidad de procesamiento 350 mm
Ucrania, Ohinki
Contacte con el vendedor
36.000 US$ ≈ 33.070 € ≈ 147.900.000 COP
Ancho de alcance 13 m
Ucrania, Kirovograd
Contacte con el vendedor
32.000 US$ ≈ 29.400 € ≈ 131.500.000 COP
Ancho de alcance 11,7 m Profundidad de procesamiento 127 mm Potencia del tractor requerida 350 Hp Velocidad de funcionamiento 8 km/h
Ucrania
Contacte con el vendedor